2022年马来酸酐MSDS .pdf

《2022年马来酸酐MSDS .pdf》由会员分享，可在线阅读，更多相关《2022年马来酸酐MSDS .pdf（8页珍藏版）》请在得力文库 - 分享文档赚钱的网站上搜索。

1、MALEIC ANHYDRIDE 1. Product Identification Synonyms: cis-Butenedioic anhydride; 2,5-furandione; toxilic anhydride CAS No.: 108-31-6 Molecular Weight: 98.06 Chemical Formula: C4H2O3 Manufacturer info.: Name: Address : Tel:2. Composition/Information on Ingredients Ingredient CAS No Percent Hazardous -

2、 - - - Maleic Anhydride 108-31-6 99.5% Yes 3. Hazards Identification Emergency Overview- DANGER! CORROSIVE. CAUSES BURNS TO SKIN AND EYES. MAY CAUSE IRRITATION AND/OR ALLERGIC REACTION IN THE RESPIRATORY TRACT. MELTED MATERIAL CAUSES THERMAL BURNS. MAY BE HARMFUL IF SWALLOWED.Health Rating: 3 - Seve

3、re (Life) Flammability Rating: 1 - Slight Reactivity Rating: 2 - Moderate Contact Rating: 3 - Severe (Corrosive) Lab Protective Equip: GOGGLES; LAB COAT; PROPER GLOVES Storage Color Code: White (Corrosive) -精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 1 页，共 8 页- Potential Health Effects- Inhalatio

4、n:Inhalation of dust or vapor may cause irritation of the nose and throat. Coughing, sneezing, and burning of the throat may be experienced. Can cause allergic respiratory reactions. Ingestion:Corrosive. Toxic. Swallowing can cause sore throat, abdominal pain, and vomiting. May cause burns to the di

5、gestive tract. Skin Contact:Corrosive. May not cause immediate burning of the skin, but prolonged contact with moist skin cause reddening and blistering or burns. Eye Contact:Corrosive. Dust or vapor cause burns or irritation of the eyes with swelling. Sensitivity to light and double vision may occu

6、r. Chronic Exposure:Repeated inhalation may cause chronic bronchitis of the asthmatic type. Repeated skin contact may lead to dermatitis or sensitization. Aggravation of Pre-existing Conditions:No information found. 4. First Aid Measures Inhalation:Remove to fresh air. If not breathing, give artific

7、ial respiration. If breathing is difficult, give oxygen. Call a physician. Ingestion:Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Skin Contact:In case of contact, immediately flush skin with plenty of soap and water for at least

8、 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Call a physician immediately. Eye Contact:Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately. 5. Fire Fighting Mea

9、sures 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 2 页，共 8 页Fire:Flash point: 102C (216F) CC Autoignition temperature: 477C (891F) Flammable limits in air % by volume: lel: 1.4; uel: 7.1 Explosion:Above flash point, vapor-air mixtures are explosive within flammable limits noted above. Fire Extingu

10、ishing Media:Alcohol foam, carbon dioxide. DO NOT USE dry chemical, multipurpose dry chemical, or loaded stream media because of explosion potential due to reactivity of basic compounds in these extinguishing media. Special Information:In the event of a fire, wear full protective clothing and NIOSH-

11、approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode. 6. Accidental Release Measures Remove all sources of ignition. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. S

12、pills: Clean up spills in a manner that does not disperse dust into the air. Use non-sparking tools and equipment. Reduce airborne dust and prevent scattering by moistening with water. Pick up spill for recovery or disposal and place in a closed container. Evacuate area of all unnecessary personnel.

13、 US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.7. Handling and Storage Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Do not r

14、euse container. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Avoid dust formation and control ignition sources. Employ grounding, venting and explosion relief provisions in acco

15、rd with accepted engineering practices in any process capable of generating dust and/or static electricity. Empty only into inert or non-flammable atmosphere. Emptying contents into a non-inert atmosphere where flammable vapors may be present could cause a flash fire or explosion due to electrostati

16、c discharge. 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 3 页，共 8 页8. Exposure Controls/Personal Protection Airborne Exposure Limits:-OSHA Permissible Exposure Limit (PEL): 0.25 ppm, 1 mg/m3 (TWA) -ACGIH Threshold Limit Value (TLV): 0.1 ppm, (TWA), Sensitizer, A4 - Not classifiable as a human carc

17、inogen. Ventilation System:A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into t

18、he general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details. Personal Respirators (NIOSH Approved):If the exposure limit is exceeded, and engineering controls are not feasible, a full-face piece respirator with

19、 an organic vapor cartridge and particulate filter (NIOSH type N100 filter) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, g

20、lycerine, etc.) are present, use a NIOSH type R or P particulate filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.

21、Where respirators are required, you must have a written program covering the basic requirements in the OSHA respirator standard. These include training, fit testing, medical approval, cleaning, maintenance, cartridge change schedules, etc. See 29CFR1910.134 for details. Skin Protection:Wear impervio

22、us protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. Eye Protection:Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in wo

23、rk area. 9. Physical and Chemical Properties Appearance:White crystals. 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 4 页，共 8 页Odor:Sharp irritating acrid odor. Solubility: 16.3 g/100ml water 25C (77F); slowly hydrolyzes. Specific Gravity: 1.48 pH: No information found. % Volatiles by volume 21C (7

24、0F): No information found. Boiling Point: 202C (396F) Melting Point: 53C (127F) Vapor Density (Air=1): 3.38 Vapor Pressure (mm Hg): 0.16 20C (68F) Evaporation Rate (BuAc=1): No information found. 10. Stability and ReactivityStability:Stable under ordinary conditions of use and storage. Readily subli

25、mes. Decomposes slowly with water forming maleic acid. When dissolved in water it is a strong acid. Molten product should be stored under 70C (158F) Hazardous Decomposition Products:Carbon dioxide and carbon monoxide may form when heated to decomposition. Hazardous Polymerization:Will not occur. Inc

26、ompatibilities:Incompatible with alkali metals, alkaline earth metals, amines 66C (150F). Reacts violently with bases. Contact with strong oxidizers may cause fires and explosions. Conditions to Avoid:Moisture, heat, flames, ignition sources and incompatibles. 11. Toxicological Information Oral rat

27、LD50: 400 mg/Kg; Skin rabbit LD50: 2620 mg/Kg Standard Draize rabbit,eye,1%, severe Investigated as a tumorigen, mutagen, reproductive effector. -Cancer Lists- -NTP Carcinogen- Ingredient Known Anticipated IARC Category - - - - 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 5 页，共 8 页 Maleic Anhydrid

28、e (108-31-6) No No None 12. Ecological Information Environmental Fate:When released to air, soil and water; maleic anhydride will probably hydrolyze to maleic acid and be processed as follows. When released into the soil, this material is expected to leach into groundwater. When released into the so

29、il, this material is expected to readily biodegrade. When released into water, this material is expected to readily biodegrade. When released into water, this material is not expected to evaporate significantly. When released into the air, this material is expected to exist in the aerosol phase with

30、 a short half-life. When released into the air, this material is not expected to be subject to wet deposition. When released into the air, this material is expected to be degraded by reaction with ozone and photochemically produced hydroxyl radicals. This material is not expected to significantly bi

31、oaccumulate. This material has an estimated bioconcentration factor (BCF) of less than 100. Environmental Toxicity:When released to soil and water; maleic anhydride will probably hydrolyze to maleic acid and be represented by the following data for maleic acid. TLm /Fathead minnow/5ppm/96 hr./fresh

32、water TLm/Mosquito fish/240 ppm/24-48 hr./fresh water 13. Disposal Considerations Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this pr

33、oduct may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. 14. Transport Information Domestic (Land, D.O.T.)- Proper Shipping Name

34、: MALEIC ANHYDRIDE Hazard Class: 8 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 6 页，共 8 页UN/NA: UN2215 Packing Group: III Information reported for product/size: 500G International (Water, I.M.O.)- Proper Shipping Name: MALEIC ANHYDRIDE Hazard Class: 8 UN/NA: UN2215 Packing Group: III Information r

35、eported for product/size: 500G 15. Regulatory Information -Chemical Inventory Status - Part 1- Ingredient TSCA EC Japan Australia - - - - - Maleic Anhydride (108-31-6) Yes Yes Yes Yes -Chemical Inventory Status - Part 2- -Canada- Ingredient Korea DSL NDSL Phil. - - - - - Maleic Anhydride (108-31-6)

36、Yes Yes No Yes -Federal, State & International Regulations - Part 1- -SARA 302- -SARA 313- Ingredient RQ TPQ List Chemical Catg. - - - - - Maleic Anhydride (108-31-6) No No Yes No -Federal, State & International Regulations - Part 2- -RCRA- -TSCA- Ingredient CERCLA 261.33 8(d) - - - - Maleic Anhydri

37、de (108-31-6) 5000 U147 No Chemical Weapons Convention: No TSCA 12(b): No CDTA: No SARA 311/312: Acute: Yes Chronic: Yes Fire: No Pressure: No Reactivity: Yes (Pure / Solid) Australian Hazchem Code: 2X Poison Schedule: None allocated. WHMIS:精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 7 页，共 8 页Thi

38、s MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. 16. Other Information NFPA Ratings: Health: 3 Flammability: 1 Reactivity: 1Label Hazard Warning:DANGER! CORROSIVE. CAUSES BURNS TO

39、SKIN AND EYES. MAY CAUSE IRRITATION AND/OR ALLERGIC REACTION IN THE RESPIRATORY TRACT. MELTED MATERIAL CAUSES THERMAL BURNS. MAY BE HARMFUL IF SWALLOWED. Label Precautions:Do not breathe dust or vapor. Do not get in eyes, on skin, or on clothing. Keep container closed. Use only with adequate ventila

40、tion. Wash thoroughly after handling. Keep away from heat, sparks and flame. Label First Aid:In all cases call a physician immediately. If swallowed, induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air.

41、If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of skin contact, immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.Thoroughly clean shoes before reuse. In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes. In all cases call a physician immediately. 精选学习资料 - - - - - - - - - 名师归纳总结 - - - - - - -第 8 页，共 8 页