无锡科磊CORELINE蝶阀止回阀.doc

《无锡科磊CORELINE蝶阀止回阀.doc》由会员分享，可在线阅读，更多相关《无锡科磊CORELINE蝶阀止回阀.doc（13页珍藏版）》请在得力文库 - 分享文档赚钱的网站上搜索。

1、【精品文档】如有侵权，请联系网站删除，仅供学习与交流无锡科磊CORELINE蝶阀止回阀.精品文档.CorelineProducts overviewWUXI CORE LINE VALVE CO .,LTDAdd:No.210 Xinyuan Road,E Hu Industrial Park,WuXi,P.R.ChinaTel(wuxi):86 18651576063Fax(wuxi):86 510 68870697Http:/E-mail:sandycoreline-coreline focus on technique and qualityCorelineCoreline brand

2、has been registerated in Germany and focused on high quality of valves and their actuators.Coreline always pursue perfect reliability with special design and accurate manufacturing process,this has made Corelines product hold a high reputation worldwide.Quality system of ISO 9001 certified by the we

3、ll know strict independent foundation DNV,also PED CE，Valve surface quality in line with NORSOK marine requirements，Valve rubbers have approval of DVGW、KTW、WRAS and FDA.Valve also marine approved with CCS、LR、BV.So far Corelines products have been used in petrochemical,power plant,steel metallurgy,ph

4、armaceutical,paper,microelectronics,food and beverage,marine,water treatment and other industries.打压现场 安装阀座 铸造现场 加工中心 质量检测 2 coreline focus on technique and qualityCorelineFigure 223蝶 阀Butterfly valveWafer type soft seated butterfly valves Unique wave line rubber seat, makes the concentric butterfly

5、 valve work similar to eccentric butterfly valve,reduces the friction between disc and rubber Unique groove inside rubber back,reduces the torque of valve 20% to 30%, enhances the flexibility and life time of the seat 50% more Multi-standard alignment holes, Suitable for flange of EN1092 PN10, PN16,

6、 ASME CLASS125/150, BS10 TABLE D, TABLE E and JIS B2239 10K,16K V-type ring around stem, prevent any leakage possibility Stainless steel plate, ensures whole life proof of stem blow-out Disc with two-piece shaft construction, enhance the flow capacity of the valve， The shape of the disc provides low

7、er torque and prolongs the life span of the valveSize Range: 2”to 56”Pressure Rating: Full vacuum to 20barFlange accomodation: EN1092 PN10/PN16 & ANSI 125/150 & BS10 Table D/E&JIS10K/16K for 2”to 12”EN1092 PN10/PN16 & ANSI 125/150&BS10 Table D/E for 14”to 24”Face to Face: EN558 Basic series 20,API60

8、9Body: Cast iron,Ductile iron,Carbon steel,Stainless steelDisc: SS201,SS304，SS316，SS316L，Aluminium Bronze,Hastelloy,Dual steel,Super dual steel.Seat: NBR,EPDM,Oil&Acid&Alkali resitant VITON-A,Steam resitant VITON-B,Hypalon,PTFE. With health and safety certificate: FDA,WRAS,DVGW,KTW,PED-CE.3coreline

9、focus on technique and quality 3Coreline蝶 阀Butterfly valveFigure 224Lug type soft seated butterfly valves Rubber vulcanized to valve body,stands on full pressure even at the end of pipe Lug bolt holes can be machined according to requirement Other Features same as 223 seriesSize Range: 2”to 56”Press

10、ure Rating: Full vacuum to 20barFlange accomodation: EN1092 PN10/PN16 OR ANSI 125/150 Face to Face: EN558 Basic series 20,API609Body: Cast iron,Ductile iron,Carbon steel,Stainless steelDisc: SS201,SS304，SS316，SS316L，Aluminium Bronze,Hastelloy,Dual steel,Super dual steel.Seat: NBR,EPDM,Oil&Acid&Alkal

11、i resitant VITON-A,Steam resitant VITON-B,Hypalon. With health and safety certificate: FDA,WRAS,DVGW,KTW,PED-CE.4 coreline focus on technique and qualityCoreline蝶 阀Butterfly valveFigure 263High performance wafer eccentric butterfly valves Disc and seat sealing fully by touching,higher pressure and l

12、ower friction Special design and accurate manufacturing make the valve torque lower than normal others Bi-directional sealing Changes of temperature have been considered when designSize Range: 2”to 60”Pressure Rating: CLASS150,CLASS300,PN20,PN50Flange accomodation: PN16,PN25,PN40,ANSI CLASS150,300Fa

13、ce to Face: API609BBody: Carbon steel,Stainless steel,Hastelloy,Dual steel,Super steelSeat: PTFE,Reinforced PTFE,SS316+PTFE(Fire-Tite)coreline focus on techniqucoreline focus on technique and quality5e and quality5Figure 264Coreline蝶 阀Butterfly valveHigh performance lug eccentric butterfly valves Di

14、sc and seat sealing fully by touching,higher pressure and lower friction Special design and accurate manufacturing make the valve torque lower than normal others Bi-directional sealing Changes of temperature have been considered when design Lug type suitable for case of not exposing bolt or end of p

15、ipeSize Range: 2”to 60”Pressure Rating: CLASS150,CLASS300,PN20,PN50Flange accomodation: PN16,PN25,PN40,ANSI CLASS150,300Face to Face: API609BBody: Carbon steel,Stainless steel,Hastelloy,Dual steel,Super steelSeat: PTFE,Reinforced PTFE, SS316+PTFE(Fire-Tite)88Corelinecoreline focus on technique and q

16、uality6蝶 阀Butterfly valveFigure 2252 PC butterfly valves Spring loaded on back of seat,prevent any leakage even under high corrosion. PTFE liner, low friction and resitant to high corrosion Rubber back ensures flexibility and diffrent rubber for diffrent temperature rangeSize Range: 2”to 24” Pressur

17、e Rating: 16barFlange accomodation: EN1092 PN10/PN16 OR ANSI 125/150 Face to Face: EN558 Basic series 20,API609Body: Ductile iron,Carbon steel,Stainless steelDisc: PTFE, SS304，SS316，SS316L，Aluminium Bronze,Hastelloy,Dual steel,Super dual steelSeat: PTFE with NBR back,PTFE with EPDM back,PTFE with Si

18、licon back,PTFE with VITON backFigure 240Double Flanged butterfly valves Stable connection,especially suitable for underground installation and frequent changes in temperatureSize Range: 2”to 120” Pressure Rating:10bar-16barFlange accomodation: EN1092 PN10/PN16 OR ANSI 125/150 Face to Face: EN558 Ba

19、sic series 13 Body: Cast iron,Ductile ironDisc: SS201, SS304，SS316，Aluminium Bronze, Hastelloy, Dual steel, Super dual steelSeat: NBR,EPDM,Oil&Acid&Alkali resitant VITON-A,Steam resitant VITON-B,Hypaloncoreline focus on technique and quality 7止回阀Check valveCorelineFigure 6140 Thin wafer swing check

20、valvesFigure 6141Spring loaded Thin wafer swing check valves Small demensions and weightness,but perfect performance. Enough opening angle, low head loss Zero leakage Quick close after spring loaded, well prevent to water hammerSize Range: 1.5”to 24” Pressure Rating:10bar-25barFlange accomodation: E

21、N1092 PN10/PN16 OR ANSI 125/150 OR JIS20K Face to Face: Industrial standardBody: Carbon steel,Stainless steel,Aluminium BronzeDisc: SS201,SS304，SS316，Aluminium BronzeSeat: NBR,EPDM,Oil&Acid&Alkali resitant VITON-A,Steam resitant VITON-B,Hypalon,PTFE.Metal to MetalFigure 612Dual Wafer check valvesSiz

22、e Range: 2”to 48” Pressure Rating:10bar-50barFlange accomodation: EN1092 PN10/PN16/PN25/PN40 OR ANSI 125/150/300 Face to Face: EN558 Basic series16, API594Body: Cast iron,Ductile iron,Carbon steel,Stainless steel,Aluminium BronzeDisc: Ductile iron Nickle plated,SS201,SS304，SS316，Aluminium BronzeSeat

23、: NBR,EPDM,Oil&Acid&Alkali resitant VITON-A,Steam resitant VITON-B,Metal to Metal8 coreline focus on technique and qualityCoreline 球 阀Ball valveFigure 181Welding connection fully welded ball valve Fully welded,no outside leakage point Face to face and stem height can be adjusted according to constru

24、ction and design On back of seat,there is spring as support,in case of correct operation,lifetime about 20 yearsSize Range: 3/8”to 36” Pressure Rating: 10bar to 40barBody: Carbon steel,Stainless steelBall: SS304，SS316Seat: Carbon reinforced PTFEFigure 182Flanged connection fully welded ball valveFig

25、ure 183Screwed fully welded ball valvecoreline focus on technique and quality 9 球 阀Ball valveCorelineFigure 184Long connection fully welded ball valveFigure 185Bury type fully welded ball valveFigure 185Flanged short fully welded ball valve10 coreline focus on technique and quality 球 阀Ball valveCore

26、lineFigure 11011-PC screwed ball valve尺寸范围： 1/4”至 3” 压力范围： PN60(1000PSI)阀体材质： 不锈钢SS304、不锈钢SS316阀球材质： 不锈钢SS304、不锈钢SS316阀座材质： 强化PTFESize Range: 1/4”to 3” Pressure Rating: PN60(1000PSI)Connecting screw: NPT,BSPTBody: SS304，SS316Ball: SS304，SS316Seat: RPTFEFigure 12012-PC screwed ball valveSize Range: 1

27、/4”to 4” Pressure Rating: PN60(1000PSI)Connecting screw: NPT,BSPTBody: SS304，SS316Ball: SS304，SS316Seat: RPTFE focus on technique and qualityCorelineFigure 1102球 阀Ball valve气动执行器Pneumatic actuatorFigure 5050Double acting peneumatic actuator Opening or closing acting by air pressure Both opening and

28、closing limit positions are adjustable Accurate manufacturing insures long life timeSize Range: 40mmto 270mm Torque Range: 8N M-3000N MConnection: ISO5211Shell material: Extruded aluminium alloy(6005-T5)Piston material: Die-casting aluminium(101A)Sealing material: NBR,VITONFigure 5051Single acting p

29、eneumatic actuator13coreline focus on technique and qualityCoreline其 他OthersFigure 411Knife gate valves Rising or non rising stem Wafer type, low weightnessSize Range: 2”to 24” Pressure Rating: 10barFlange accomodation: EN1092 PN10/PN16 OR ANSI 125/150Body: Cast iron,Ductile iron,Carbon steel,Stainl

30、ess steelDisc: SS201,SS304，SS316Seat: NBR,EPDM,Oil&Acid&Alkali resitant VITON-AFigure 901 Screwed rubber expansion jointsSize Range: 1/2”to 3” Pressure Rating: 16barConnection: BST or NPT female threadMain body: NBR,EPDM,CRLining: Nylon cord fabricFrame: Steel wire Threaded end: Galvanized Malleable

31、 ironFigure 902Single Spherical flanged rubber expansion jointsFigure 912Size Range: 1 1/4”to 24” Pressure Rating: 16barFlange: EN1092 PN10/PN16 OR ANSI 125/150Main body: NBR,EPDM,CRLining: Nylon cord fabricFrame: Steel wire Flange: Carbon steel powder epoxy painte14 coreline focus on technique and qualitWUXI CORE LINE VALVE CO.,LTD.Add:No.210 Xinyuan Road,E Hu Industrial Park,WuXi,P.R.ChinaTel(wuxi):86 18651576063Fax(wuxi):86 510 68870697Http:/E-mail:sandycoreline-